Birrus Architectural Matting Systems
Architectural in Greater Dandenong

In the early years while operating as an import company cirrus became involved with floor cleaning equipment where the roots for transitioning to matting products were born. Over the years' cirrus have designed and produced a prestigious range of entrance mats combining attractive aluminum extrusions with a ravishing selection of carpet and textured tread inserts to enhance and protect the entrance to your building.

cirrus Matting Systems are designers and manufacturers of architectural entrance matting in Australia. We are an Australian Made and Owned company, using locally sourced materials. cirrus have been manufacturing tall end entrance matting for over 50 years. Our matting is specified for use at entrances in commercial, government and community buildings. We believe in only using the best quality products to create our prestigious matting which involves sourcing other Australian made products. The aluminum we use in our products is Australian Made, along with the carpet and PVC inserts. Our mats do not reach off the shelf’, every mat is unique and custom made by hand to our clients specification. The cirrus 'ULTRAMAT' is our Flagship product and is constructed from alternate treads of aluminum and carpet running across the doorway. cirrus 'DURAGRIT' (abrasive grit) is a solid wearing industrial nonslip tread insert developed for internal and external environments where adjacent floor surfaces may prove hazardous. cirrus DURAGRID’ shown below is an entry exposed to weather incorporating a cirrus unfold construction’ mat and custom made metal grate system allowing the. Classic Stripe is a dense duty mat which is used in moderate to high traffic entrances, lifts or lobbies in office buildings, schools and. It is worn recessed in entrances or lifts or limp laid in entry. Ribbed mat is a lenient traffic entrance mat for indoor or outdoor use. Sound and AccessibleSimple, durable and versatile Tactile Ground Surface Indicators.Making your building and its surroundings safe and accessible for the visually worn requires the. Protection is to be taken that surfaces are clean, free of oil and dirt and that no sealers etc have been installed that will. These tapes are hard wearing and designed for a. These tapes are firm wearing and designed for a range of applications including: It is used recessed in entrances or lifts or loose laid in entry ways or lobbies in Commercial buildings, schools and shopping centers. Classic Stripe is a compressed duty mat which is used in temperate to tall traffic entrances, lifts or lobbies in office buildings, schools and shopping centers. It has the same construction and styling as Ultramat except that treads consisting of thick duty rubber are inserted instead of carpet. cirrus 'DURAGRIT' (abrasive grit) is a solid wearing industrial nonslip tread insert developed for internal and outer environments where adjacent floor surfaces may prove hazardous. A packed range of inserts is available from your local distributor. This unique product provides safe footing in tall traffic areas exposed to wet or slippery conditions. Duragrit mats are designed for industrial situation, if impaired as an entrance mat the abrasive nature of the mat treads will devastate dress shoes and will receive skin from kids’ knees should they fall onto the matting. cirrus’ originate construction Slimline mats are linked with a perforated joining strip to allow for drainage via the metal grate system.